S-02 / Outer body
Woven outer body
Dense woven appearance; fibre, coating and weight unconfirmed.
Carry this question into a brief← Collection / WP-P02
Clamshell pack / DEVELOPMENT STUDY
Transfer Pack
From platform to meeting.
A structured travel-pack study with a suitcase-style opening.
Start this sample briefCONCEPT ONLY / NO OFFER OR TESTED CAPACITY
DESIGN DIRECTION
A working product dossier.
All figures below are illustrative design targets. They are not a quotation, production specification or airline allowance.
- Concept reference
- WP-P02
- Study envelope
- 46 × 31 × 18 cm Unvalidated outer dimensions
- Opening
- Full clamshell access
- Organisation
- Two loose packing modules
- Carry direction
- Shoulder harness + side grip
- Evidence status
- Not tested Physical sample required
THE LAYER ATLAS
See what changes.
Choose a layer to connect a visual decision with a component question. The schematic is explanatory, not a CAD model.
WP-P02 / ASSEMBLY STUDY
01 Body02 Organiser03 Hardware
INSPECT A LAYER
All component notes are shown.
O-02 / Organisation
Internal organiser
Two loose module concept; use a physical packing trial.
Carry this question into a briefH-02 / Carry hardware
Harness / side grip
Load path and foam stack require wearer and seam review.
Carry this question into a briefKeyboard: Tab to a layer and press Enter or Space. Motion can be switched off in the footer. Without JavaScript, every component note stays available.
Access is the design brief.
The full perimeter opening makes a useful discussion about packing a bag on a bed or work surface. It also raises questions about zip path, hinge flexibility and where loose modules move during carrying. The sample brief should specify the sequence of access, not only a pocket count.
Fit the real object.
A laptop screen diagonal does not define the laptop sleeve size. Measure the actual device with its protective case, record cable and charger access, and check the opening as well as the pocket. No device compatibility is claimed by this study.
Try the harness under a representative load.
The shape in the image is only a visual proposal. Shoulder geometry, back contact, foam recovery and strap adjustment need a physical fit review. Compare the packed and empty silhouettes so the sample team can separate appearance issues from support issues.
THE FIRST SAMPLE REVIEW
Three questions
to take forward.
Use these as discussion prompts. The actual pass criteria and testing method must be agreed for your product and destination market.
Read the evidence approach- What is the actual device envelope, including its case?
- Does the harness remain comfortable with the intended load?
- Can the side grip be reached while the bag is fully packed?