Record the exact assembly
Ask for a model identifier, drawing revision and complete component list. Tie the physical sample label to the same record.
S1 / Concept dossier
VectorTwo-lens full rim
A defined full-rim silhouette for a component-led sample conversation.
- Visual direction
- Slate + signal
- Illustrative dimensions
- 58 / 17 / 132 mm
- Dimension order
- lens width / bridge / temple
- Sample status
- Concept only; no stock or approval
A form to
investigate.
Visual intent
The angular front creates a clear lens boundary. A small temple inset introduces a contrast cue without turning the frame into a logo carrier.
First sample conversation
Compare the nose contact geometry and the tip sleeve as separate sample questions. A familiar visual outline does not establish shared tooling or serviceability.
Dimensions above are invented illustrative references. They are not measured from the artwork, not toleranced drawings, and not fit or lens-processing advice.
Interface focus
Keep this
question open.
Can the nose saddle be identified independently of the frame colour and temple revision?
Check whether the visible temple insert is decorative, removable or integral. Keep that answer attached to the exact drawing revision.
Nose saddle and temple-tip pair are reference candidates. Hinge covers need assembly evidence.
Read the evidence boundaryBefore a real
sample is accepted.
The dossier has no supplier facts to substitute for the documents below.
Define the test scope
Ask the real supplier to identify applicable requirements for the intended use and market. This demo makes no optical, impact, retention or protective claim.
Name the next owner
Keep fit observations separate from approval. Record the open issue, who will answer it and what evidence would close it.