Record the exact assembly
Ask for a model identifier, drawing revision and complete component list. Tie the physical sample label to the same record.
S2 / Concept dossier
RelaySingle shield concept
A continuous shield study that keeps lens and component assumptions visible.
- Visual direction
- Pebble + navy
- Illustrative dimensions
- 142 / 18 / 128 mm
- Dimension order
- overall front / bridge reference / temple
- Sample status
- Concept only; no stock or approval
A form to
investigate.
Visual intent
A continuous lens surface sits beneath a restrained brow. The single-shield concept calls for a different evidence set from the two-lens studies.
First sample conversation
Ask for the complete assembly definition before discussing a shield change. The concept image cannot establish edge retention, lens properties or replacement method.
Dimensions above are invented illustrative references. They are not measured from the artwork, not toleranced drawings, and not fit or lens-processing advice.
Interface focus
Keep this
question open.
Which nose assembly belongs to the shield revision, and is the attachment method documented?
No hinge-cover mapping is provided for this study. A similar-looking cover from another model must stay outside the reference list.
Nose saddle and temple-tip pair may be discussed as reference candidates. Hinge cover remains unmapped.
Read the evidence boundaryBefore a real
sample is accepted.
The dossier has no supplier facts to substitute for the documents below.
Define the test scope
Ask the real supplier to identify applicable requirements for the intended use and market. This demo makes no optical, impact, retention or protective claim.
Name the next owner
Keep fit observations separate from approval. Record the open issue, who will answer it and what evidence would close it.