DEMO / ORIGINAL FICTIONAL FURNITURE / NOT SENT
DINING FURNITURE / TABLE AND CHAIR SAMPLE QUESTIONS
ROUND / COMMON / RC-232 / Curved-back side chair

Question notes only. Not a seating plan, table-and-chair fit approval, furniture specification or capacity assessment.

ILLUSTRATIVE PRODUCT RECORD
Example W × D × H: 500 × 540 × 790 mm — illustrative
Seat-height target: 450 mm — example / actual chair needed
Frame reference: Four legs and curved back / actual joints required
Seat appearance: Clay upholstered pad / cover and filling unspecified
Surface record: Actual timber, finish and textile identities needed
Floor interface: Actual glide or foot detail to define
Study status: Illustrative dimensions / original appearance concept
Evidence scope: Actual supplier drawings, physical sample and applicable records needed

CONSTRUCTION AND PHYSICAL SAMPLE QUESTIONS
Keep overall height and seat geometry distinct
Request the actual chair envelope, seat, back and underside drawing. A nominal seat-height target does not establish comfort, table clearance, user suitability or seating capacity. Review the real chair with the intended table and room references where relevant.

Follow the joints and the seat pad
Retain actual frame, joint, fixing, pad support, filling and textile identities. The image supplies no timber species, cover composition, abrasion, fire, load or durability result. A frame junction and a complete chair are separate physical sample scopes.

Name the floor-contact and care records
Ask for the actual foot or glide and the supplier’s finish-specific care records. A small dark contact point does not prove non-marking behaviour or floor compatibility. Any real use or market statement requires applicable product-specific evidence and responsible review.

PRODUCT QUESTIONS
Does the chair have a verified load or fire rating?
No. Applicable actual product and material evidence must be requested.

Can it be paired with any table of similar height?
No fit is approved. Actual seat, underside, table and project references require review.

Does the setting diagram approve a table-and-chair pair?
No. Review the actual table underside, chair geometry, finish references and measured room. Product-specific load and stability evidence and responsible project review remain required; chair markers establish no fit or seating capacity.

ACTUAL REFERENCES TO REQUEST
Identify actual table and chair revisions, including tabletop, underside, apron, base, chair frame and seat. Retain separate physical finish references before reviewing the assembled pair in the measured room. Ask for supplier assembly and care records and applicable product-specific evidence; example dimensions do not establish seating capacity or clearances.

No price, inventory, lead time, seating capacity, table-and-chair fit, load or stability approval is calculated. Request actual table, chair, underside, finish and measured-room references, physical samples and applicable product-specific evidence.
Nothing has been sent. No physical sample, assessment report or real product is supplied by this demo.