DEMO / ORIGINAL FICTIONAL FURNITURE / NOT SENT
CASEGOODS FURNITURE / PANEL AND FITTING SAMPLE QUESTIONS
BAY / INDEX / BI-222 / Tall two-front cabinet

Question notes only. Not a cabinet shop drawing, cut list, hardware specification, anchoring instruction or load rating.

ILLUSTRATIVE PRODUCT RECORD
Example W × D × H: 900 × 450 × 1800 mm — illustrative
Front question: Two doors / actual overlap and movement needed
Body record: Side, backing and shelf revisions required
Surface record: Ash-like appearance / material identity unverified
Base reference: Inset lower body / actual fixing needed
Installation scope: Actual product and site assessment required
Study status: Illustrative dimensions / original appearance concept
Evidence scope: Actual supplier drawings, physical sample and applicable records needed

CONSTRUCTION AND PHYSICAL SAMPLE QUESTIONS
Retain height and installation setting together
Keep the actual cabinet revision with the real floor, wall and assembly setting. A tall appearance supplies no load, stability, anti-tip, anchor or safe-installation result. Installation decisions belong to competent review using the actual product and site records.

Review door movement with the real body
Request actual hinge location, opening direction, pull, front overlap and internal panel records. Use a physical sample to observe the intended movement and gaps. The partly open door in the original image is an appearance reference, not a tested fitting or approved clearance.

Keep shelves and backing as actual components
Identify the actual shelf, side, backing, joint and finish records. Nominal external dimensions do not establish shelf size, capacity or interchangeable panels. Ask for applicable material, assembly and product-specific assessment evidence before any purchasing or use conclusion.

PRODUCT QUESTIONS
Is an anti-tip or anchor solution provided?
No. The actual cabinet and installation setting require responsible product/site review.

Does the visible shelf have a verified load capacity?
No. Actual panel, support and relevant assessment evidence remain required.

Does a bay or front selection verify the cabinet installation?
No. Actual panel, backing, hardware, assembly and installation records are required. Request relevant product-specific load and stability evidence and responsible site review; the diagram supplies no anchoring solution.

ACTUAL REFERENCES TO REQUEST
Retain the actual cabinet envelope, internal bay geometry, panel core, face, edge, backing and fitting revisions. Separate a finish chip from a body-to-front junction and a complete cabinet reference. Request supplier assembly records and responsible review of the actual installation setting; no anchoring or stability solution is supplied.

No price, inventory, lead time, storage capacity, load, stability or anchoring approval is calculated. Request actual panel, backing, fitting and assembly records, physical cabinet samples and responsible review of the installation setting.
Nothing has been sent. No physical sample, assessment report or real product is supplied by this demo.