Home / Equipment for the file route
TAKELINE / physical hardware concept
Equipment for the file route
Capture, clip and transfer are separate hardware responsibilities. No speech, file or identity is recorded by this website.
DEMO / original hardware concepts. All figures, interfaces and proposed contents are illustrative; no compatibility, safety, certification or tested-performance approval.
3 concepts shown
No matching concepts. Try another task or reset the filters.

EQUIPMENT RECORD / H2
Handheld recorder concept
A portable recorder form for a buyer-managed capture and removable-media review. Its inactive display and example figures do not establish recorded audio performance.
- Capsule layout
- Crossed stereo concept
- File target
- 48 kHz / 24-bit WAV; unverified
- Media
- Removable card scope to confirm
- Control
- Blank buttons and trim-ring concept
Open the full equipment sheet ↗
EQUIPMENT RECORD / C1
Clip recorder concept
An enclosed clip-device form for reviewing attachment, button reach and export scope on a non-personal bench protocol. No covert-recording or consent-related feature is represented.
- Body target
- 62 × 24 × 13 mm illustrative envelope
- Control
- One red mechanical-button concept
- Indicator
- Inactive status-window concept
- Clip
- Integral rear clip sample
Open the full equipment sheet ↗
EQUIPMENT RECORD / R1
Media transfer dock concept
A reader concept for testing one nominated media/file/host combination. It makes no universal card support, throughput or data-recovery claim.
- Slot
- Single removable-media slot concept
- Connection
- USB-C connector concept
- Link target
- USB 2.0 planning scope; unverified
- Body target
- 74 × 42 × 14 mm illustrative envelope
Open the full equipment sheet ↗