C8 / Device contact
Passive phone cage concept
Body / case / controls
- Clamp target
- 65–86 mm body-width planning range
- Case allowance
- Buyer-defined; not validated
- Shell
- Coral aluminum-look concept
Fitting is the first design decision.
Small parts.
A better fit brief.
Passive phone cages, tabletop stands and organizer concepts specified around the actual device, case and cable clearance.
One reference at a time
The phone body is only half the fit.
The case, contact pads and cable exit need a place on the same revision record. An opening-width target cannot describe them all.
Open the device-fit worksheet ↗A proposed fit record
- Reference
- Device body + case revision
- Contact
- Pads / clamp / hinge sample
- Access
- Buttons / camera / connector
- Pack
- Insert + contents + variant ID
Procurement prompts only / not completed fit results.
Three parts.
Three contact questions.
Passive physical hardware. No powered stabilization, charging or universal-fit claim.
S4 / Desk placement
Folding desk stand concept
Orientation / hinge / cable
- Folded envelope
- 92 × 74 × 24 mm illustrative target
- Hinge
- Two-arm folding concept
- Foot
- Rounded ivory contact base
O3 / Pack organization
Accessory organizer concept
Contents / clips / closure
- Shell envelope
- 118 × 68 × 32 mm illustrative target
- Clip set
- 3 proposed removable positions
- Shell
- Ivory polymer-look concept
Access before appearance
Leave room for the actual cable.
Review the hinge, foot and connector opening with the nominated device. Then define the finish and protective insert.
Follow the sample revision ↗